Storm Door Repair

Get in touch with Riverside's finest.

    Do you have a broken window or door? Are you a private homeowner or do you own a shop?

    Get in touch and help is on it’s way! When it comes to window and door repairs, Leave it to the pros. For a FREE quote and estimate,

    CALL US: ☎️ (951) 425-4017

    Or, fill out this form and we will contact you shortly




    Need a repair? Show us the damage: Send us some photos for a FREE cost estimate.

    Storm Door Repair in Riverside: How to Fix a Broken Storm Door

    If you have a broken storm door, it can be a real hassle. Not only is it an eyesore, but it can also be very dangerous. In this blog post, we will discuss how to fix a broken storm door in Riverside. We will cover the cost of repair, as well as how to properly close your storm door in the event of a storm.

    Can you fix a storm door yourself?

    The cost of storm door repair can vary depending on the severity of the damage. If you have a small crack or hole in your storm door, you may be able to fix it yourself with some caulking or weatherstripping. However, if the damage is more significant, you will likely need to replace the entire storm door. The cost of replacement can vary depending on the size and type of storm door.

    What can damage a storm door?

    There are a few things that can damage a storm door. The most common is wind. If your storm door isn’t properly closed, the wind can blow it open and cause damage to your home. Another thing that can damage a storm door is water. If you live in an area that gets a lot of rain or snow, the moisture can seep in and cause the door to rust.

    The most common repair for a storm door is to fix the bottom of the door. This is where it tends to wear out the most. If you have a broken storm door, here are the steps you need to take to fix it:

    1. Remove the screws that hold the lower panel in place
    2. Remove the bottom panel
    3. Replace the screws and tighten them up
    4. Make sure the door swings freely and is not sticking

    If you have a storm door that won’t close, here are the steps you need to take:

    1. Close the main door and make sure it’s locked
    2. Check to see if the storm door is in the correct position
    3. If it’s not, adjust it accordingly
    4. Close the storm door and make sure it latches shut
    5. Check to see if the screws are tight

    If you have any other questions about storm door repair, please don’t hesitate to give us a call. We would be happy to help!

    How do you replace the hardware on a storm door?

    The first thing you need to do is remove the old hardware. This includes the handle, latch, and hinges. To do this, you will need a screwdriver. Once the old hardware is removed, you can install the new hardware. Be sure to follow the instructions that come with the new hardware. Finally, test the door to make sure everything is working properly.

    If you need help with storm door repair in Riverside, please give us a call. We would be happy to assist you!

    How to fix the bottom of a storm door?

    If you have a broken storm door, the first thing you need to do is fix the bottom of the door. This is where it tends to wear out the most. To fix it, you will need:

    • Screwdriver
    • Remove screws that hold lower panel in place
    • Remove bottom panel
    • Replace screws and tighten them up
    • Make sure door swings freely and is not sticking

    How to close a storm door?

    If you have a storm door that won’t close, here are the steps you need to take:

    • Close the main door and make sure it’s locked
    • Check to see if the storm door is in the correct position
    • If it’s not, adjust it accordingly
    • Close the storm door and make sure it latches shut
    • Check to see if the screws are tight

    Why does my storm door not close?

    There are several reasons why your storm door might not close. The most common reason is that the storm door is not in the correct position. Another reason could be that the screws are loose. If you have checked both of these things and your storm door still will not close, please give us a call.

    How to fix a sagging aluminum storm door?

    If your aluminum storm door is sagging, here are the steps you need to take:

    • Measure the door to see how much it has sagged
    • Adjust the hinges accordingly
    • Tighten all of the screws
    • Check to see if the door is still level

    If you need help fixing your broken storm door, give us a call!

    Rate this post

    Recommended Articles

    Contact Us
    COVID-19 NOTICE:
    Our technicians are equipped with masks and gloves complying with health and safety regulations.
    This is default text for notification bar